3.1 Installation Precautions
When installing the PC 5150, please follow the precautions listed below:
1
Power turned off: When installing the PC 5150 make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
2
Certified Engineers: Only certified engineers should install and modify
on-board functions.
3
Mounting: The PC 5150 is a heavy device. When mounting the system onto
a rack, panel, wall or arm please make sure that at least two people are
assisting with the procedure.
4
Anti-static Discharge: If a user open the rear panel of the PC 5150, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.2 Preinstalled Components
The following components are all preinstalled.
Motherboard
„
15" TFT LCD
„
15" Touch screen (T-R model only)
„
Power switch
„
Power supply
„
Inverter board
„
PCI riser card
„
System cooling fans
„
Preinstalled OEM customizations may include the following.
CPU
„
HDD
„
FDD
„
CD drive
„
DIMM
„
Removal and reinstallation of some of the components are described in Chapter 4.
40
PC 5150 Flat Panel PC
ACNODES ® Corp.