Psu Module Replacement; Figure 4-7: Dimm Socket Clip Locations - Acnodes PC 5150 User Manual

Figure 4-7: DIMM Socket Clip Locations

Step 3: Slowly slide the new DIMM module along the plastic guides at both ends of the
socket. Press the DIMM module down into the socket until it clicks into position
and the two handles have automatically locked the memory module into a place.

4.5 PSU Module Replacement

If the PSU module has been damaged it must be replaced. To replace the PSU module,
please follow the steps below.
Step 1: Remove the back cover. See Section 4.3.1 above.
Step 2: Detach the elevated platform. See Section 4.3.2 above.
Step 3: Remove and remove the elevated platform from the PC 5150.
Step 4: Disconnect the PSU power cable connectors from the motherboard (Figure 4-8)
68
PC 5150 Flat Panel PC
ACNODES ® Corp.
ep 0: