Dram Frequency [Auto]; Configure Dram Timing By Spd [Enabled] - Acnodes PC 5150 User Manual

BIOS Menu 21: North Bridge Chipset Configuration
Î

DRAM Frequency [Auto]

Use the DRAM Frequency option to specify the DRAM frequency or allow the system to
automatically detect the DRAM frequency.
Î
200MHz
Î
266MHz
Î
333MHz
Î
Auto
Î

Configure DRAM Timing by SPD [Enabled]

Use the Configure DRAM Timing by SPD option to determine if the system uses the
SPD (Serial Presence Detect) EEPROM to configure the DRAM timing. The SPD
EEPROM contains all necessary DIMM specifications including the speed of the individual
components such as CAS and bank cycle time as well as valid settings for the module and
Sets the DRAM frequency to 200MHz
Sets the DRAM frequency to 266MHz
Sets the DRAM frequency to 333MHz
D Automatically selects the DRAM frequency
EFAULT
PC 5150 Flat Panel PC
115