Getting Help; Unable To Reboot After Configuration Changes; Bios Menu Bar; Table 5-1: Bios Navigation Keys - Acnodes PC 5150 User Manual

F2 /F3 key Change color from total 16 colors.
forward.
F10 key Save all the CMOS changes, only for Main Menu

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When F1 is pressed a small help window describing the appropriate keys to use and the
possible selections for the highlighted item appears. To exit the Help Window press E
the F1 key again.

5.1.4 Unable to Reboot After Configuration Changes

If the computer cannot boot after changes are made to the system configuration, use the
jumper described in Chapter 3, Section 3.5.3 to reset the CMOS defaults.

5.1.5 BIOS Menu Bar

The menu bar on top of the BIOS screen has the following main items:
Main
Changes the basic system configuration.
„
Advanced
„
PCIPnP
Changes the advanced PCI/PnP Settings
„
Boot
Changes the system boot configuration.
„
Security
Sets User and Supervisor Passwords.
„
Chipset
Changes the chipset settings.
„
Power
Changes power management settings.
„
Exit
Selects exit options and loads default settings
„
The following sections completely describe the configuration options found in the menu
items at the top of the BIOS screen and listed above.
Changes the advanced system settings.
PC 5150 Flat Panel PC
F2 to select color
or
SC
73