Introduction; Starting Setup; Using Setup - Acnodes PC 5150 User Manual

5.1 Introduction

A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options that may be
changed.

5.1.1 Starting Setup

The AMI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the D
2. Press the D
If the message disappears before the D
again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press E
change entries, press F1 for help and press E
Key
Up arrow
Down arrow
Left arrow
Right arrow
Esc key
"+" key
"-" key
F1 key
72
key as soon as the system is turned on or
ELETE
key when the "Press Del to enter SETUP"
ELETE
message appears on the screen. 0.
ELETE
Function
Move to previous item
Move to next item
Move to the item on the left hand side
Move to the item on the right hand side
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option
Page Setup Menu
PC 5150 Flat Panel PC
key is pressed, restart the computer and try
to select, use the "+" and "-" keys to
NTER
to quit. Navigation keys are shown in.
SC
ACNODES ® Corp.