Pmc-Hdd1 Module With Hard Disk Drive Attached - Kontron PEP CP321 Manual

CP321
E. PMC-HDD1 Module
E.1 Board description
The optional PMC-HDD1 module provides the Kontron PowerPC-based CPU boards with a
cost-effective way to add substantial mass storage capacity. It is designed to connect a 2.5"
IDE hard disk drive to the PCI bus of those boards. It is based on the silicon image IDE con-
troller SiI0680, which provides the interface between the 32 bit wide, 33 MHz PCI bus and a
standard IDE hard disk drive. It is able to handle transfer rates up to the ATA-133 speed stan-
dard.
Note...
• The maximum transfer rate which can be achieved with this module
is restricted by the hard drive in use.
• The capacity of the module is defined by the hard drive in use.
Figure E-1: PMC-HDD1 Module with Hard Disk Drive Attached
PMC-HDD1
ID 24977, Rev. 02 © 2003 Kontron Modular Computers GmbH
PMC-HDD1 Module
HARD DISK DRIVE UNIT
Page E - 3