Kontron PEP CP321 Manual page 101

CP321
L O G I N
FUNCTION:
SYNTAX:
DESCRIPTION:
USAGE:
L O G O U T
FUNCTION:
SYNTAX:
DESCRIPTION:
ID 24977, Rev. 02
Initiate ftp server session
login <ip-of-host> <username> [<password>]
where:
login command
<ip-of-host> parameter: value: numerical string
IP address of host: nnn.nnn.nnn.nnn
<username> parameter: value: string
ftp server "username"
<password> parameter: value: string
user's password
The command "login" is used to establish an ftp server session. The
"<ip-of-host>" must be specified as four numbers separated by single
dots. The "<password>" parameter is not necessary if the server does
not request one.
Initiate ftp server session
COMMAND / RESPONSE:
login 192.168.47.12 johndoe mypassword
(Response is dependent on the server accessed)
Terminate telnet session with NetBootLoader
logout
A remote telnet session will be terminated with the command
"logout". No application is loaded and started if the session is
terminated with "logout". The NetBootLoader waits for a new session
to be initiated or for a command entry from the serial console.
© 2003 Kontron Modular Computers GmbH
NetBootLoader
Page 5 - 21