Kontron PEP CP321 Manual page 96

NetBootLoader
C L O N E
FUNCTION:
SYNTAX:
DESCRIPTION:
USAGE:
Page 5 - 16
Program the NetBootLoader to FLASH
clone [-n]
where:
clone command
-n option:
program from data buffer
To update the NetBootLoader itself, the command "clone" is used.
The application image source for programming is the data buffer. The
image must first be downloaded to the data buffer from an ftp server.
To program from the data buffer, the command "clone -n" is used.
The new image is checked for validity. If an image is invalid, the
update is aborted. Additionally, the operation must be confirmed by
typing the word "yes". Any other or no input will cancel the operation.
Program NetBootLoader (normal operation)
COMMAND / RESPONSE:
NetBtLd> clone -n
clone: Fixup FLASH info from ftp buffer
This will overwrite the current ...
NetBootLoader, are you sure? [no] yes
clone: System transferred; Start again, ...
assure that Bootjumper is removed.
NetBtLd>
Note: When responding to the overwrite query, "yes" must be spelled
out. Any other response will terminate the cloning operation.
© 2003 Kontron Modular Computers GmbH
CP321
ID 24977, Rev. 02