A.7. Board Installation - Kontron PEP CP321 Manual

Power pc-based cpu board for compactpci applications

Table of Contents

CP321

A.7. Board Installation

In order to keep the installation process as simple and easy as possible please follow the rec-

ommended order of work:

ESD Equipment!

Your carrier board and PMC module contain electrostatically sensitive

devices. Please observe the necessary precautions to avoid damage to

your board:

• Discharge your clothing before touching the assembly. Tools must be

discharged before use.

• Do not touch components, connector-pins or traces.

• If working at an anti-static workbench with professional discharging

equipment, please do not omit to use it.

PMC Module Installation

1. Place the EMC gasket on the bezel of your PMC-Module.

2. Push the PMC bezel into the window of the front panel of the CP320-IO1 and plug the

connectors together.

3. Use four screws (M2.5

Installation of the CP320-IO1 Module on the CP321 Baseboard

1. Place the CP320-IO1 exactly above the CP321

2. Plug them togethor

3. Use 4 screws (2.5

Note...

For further information regarding the installation of the CP320-IO1

board refer to the CP321 Installation chapter.

ID 24977, Rev. 02

6mm) to secure the module to the board.

6 mm) to secure the board to the CP321

CP320-IO1 Module

Page A - 11

Table of Contents