Table of Contents
Advertisement
CP321
5.7
Commands
The following commands are available with the NetBootLoader. Where an ellipsis (...) appears
in the command syntax it means that the command is continued from the previous line. Ob-
serve any spaces that may be between the ellipsis and the remainder of the command.
A B O R T
FUNCTION:
SYNTAX:
DESCRIPTION:
B W
FUNCTION:
SYNTAX:
ID 24977, Rev. 02
Terminate the NetBootLoader boot operation
abort
This command is used by the operator to to terminate the boot
operation during the boot wait time to allow the operator to perform
other NetBootLoader operations. To be asserted it must be issued
during the boot wait time which is indicated by the alternating
assertion of the MC6 (LED1) signal.
Set or display the parameters of the boot wait function of the
NetBootLoader
bw [<time>| -f]
where:
bw
command
<time>
parameter: value: seconds
1, 2, 5, 10, 20, 50
-f
option:
force CRC update
© 2003 Kontron Modular Computers GmbH
NetBootLoader
Page 5 - 13
Advertisement
Table of Contents
