Table of Contents
Advertisement
Product Description
Features
The KISS-Stor 0/5 supports the following features:
q
Support three SATA-I or II disk channels (but run in SATA I).
q
Support one SATA-I host channel
q
Support RAID level 0 and 5
q
Drives are hot swappable (RAID 5)
q
Fan cooler (Ball bearing type)
q
Key locking to prevent unauthorized access to the disk drives
q
Audible alarm on drive failure
q
Automatic drive failure detection
q
Battery backup for disk rebuild status
Hard Drive Hot Swapping for RAID 5 Configuration
Hot Swapping allows, while KISS-Stor 0/5 is configured as a RAID 5 array, the
removal and installation of hard disk drives without powering down the system.
Automatic Drive Rebuilding for RAID 5 Configuration
While KISS-Stor 0/5 is configured and a member drive in a RAID 5 array is
replaced, the KISS-Stor 0/5 will automatically start to rebuild data to the new
drive.
RAID Failure audible Alarm
In the event that a drive fails, the corresponding red indicator turns on and an
alarm sounds. You can turn off the alarm by unlocking the drive carrier.
18
KISS-Stor 0/5 – User's Manual
Advertisement
Table of Contents
