Kontron PEP CP321 Manual page 105

CP321
P C I
FUNCTION:
SYNTAX:
DESCRIPTION:
P F
FUNCTION:
SYNTAX:
ID 24977, Rev. 02
Display PCI information
pci
The command "pci" is used to display detailed information on all
detected PCI devices. The bus number, device number, function
number, vendor, and device ID's are displayed together with the
configured base addresses and the assigned IRQ number.
Set or display the serial port parameters (format)
pf [<port> [<baud>][/[<bitschar>]
...[/[<parity>][/<stops>]]]]
where:
pf command
<port> parameter: string: "term" or "ser0"
defines serial port to be configured
<baud> parameter: value: numeric: "50, 75, 110, 134.5,
150, 300, 600, 1200, 1800, 2000, 2400, 3600,
4800, 7200, 9600, 19200, 38400, 115200"
defines the baud rate for the port
<bitschar> parameter: value: numeric: "7" or "8"
defines the number of bits per character
<parity> parameter: string: "n" (none), "o" (odd), "e" (even)
defines parity to be used
<stops> parameter: value: number: "1", "2"
defines number of stop bits
© 2003 Kontron Modular Computers GmbH
NetBootLoader
Page 5 - 25