Stitch In Ditch Quilting - JUKI DX-4000QVP Instruction Manual

6.21. Stitch in ditch quilting

No. Pattern
001
❶
Presser foot
Edge Sewing presser foot
(R)
Leave the machine in
Lock mode
This is for quilting the edge of patchworks and appliqués.
The machine will sew the lower (thinner) side of the fabric
layers. As a result, the stitches will not be noticeable and
have an effect to make the design look three dimensional or
emphasized.
1
Put the top layer of fabric with patchwork
and/or appliqués, quilting cotton and
bottom layer of fabric together by pin or
basting stitches.
2
Put the guide of the presser foot along
with the crease and sew.
The needle enters behind the guide, so that the edge
of the crease can be sewn.
If the desired points can not be sewn, adjust the
needle position. (Refer to page 45)
● ● Curved concealed quilting
Use manual buttonhole presser foot (I) or the open toe
presser foot (O). Sew curves by lifting the presser foot and
changing the direction very often.
Also this can be done by free motion with the quilt
presser foot. (Refer to page 99)
104