② Stop Position Of Needle; ③ Pivot - JUKI DX-4000QVP Instruction Manual

② Stop position of needle
It is possible to set the position of the needle (upper or lower position) at the time of stopping the sewing machine.
③ Pivot
It is possible to set so that the presser foot automatically goes up when the sewing machine stops with its needle
down.
Select [Stop position of needle] from [Setting].
Select the "Lower stop position" or the "Upper stop po-
sition".
When you tap the portion outside the setting screen,
the screen returns to the common setting screen.
Select [Pivot] from [Setting].
● Setting the ON / OFF of the pivot function
: ON
: OFF
● Setting the pivot height
Set the pivot height by sliding the slide bar to the
right or left.
When you tap the portion outside the setting screen,
the screen returns to the common setting screen.
110