JUKI DX-4000QVP Instruction Manual page 81

❸
❹
❺
* No. 033 In the case of bartacking (memory)
Since the length of a bartack that is sewn for the first time is stored in memory, step of procedure
4
is not required for bartacking for the 2nd time and beyond.
If you want to change the bartack length stored in memory, any other pattern should be selected.
3
Start sewing.
Push the start/stop button and the machine starts
to sew straight stitches.
❸ Starting point
4
When it comes to the turning point ❹
push the reverse stitch button.
The machine goes back to the starting point by
sewing straight stitches and then it sews zigzag
stitches to the point where the reverse stitch but-
ton is pushed.
5
When the machine comes to the
sewing end point, push the reverse
stitch button.
The machine sews lock stitches ❺ and stops.
80