JUKI DX-4000QVP Instruction Manual page 98

❺
* No. 103 In the case of 2-step buttonhole (Memory)
Since the length of a
4
is not required for
If you want to change the
97
❻
buttonhole that is sewn for the first time is stored in memory, step of procedure
buttonhole for the 2nd time and beyond.
buttonhole length stored in memory, any other pattern should be selected.
5
Push reverse stitch button when it comes
to the sewing start point ❺ .
6
Sew bartack and lock stitches until the
machine stops automatically.
Trim the thread. Lift the presser foot. Then, remove
the material from the sewing machine.
7
Pierce a stopper pin at the bartack and
open the buttonhole with a ripper ❻ .
Be careful not to cut the stitches.
* In the case of a 2-step buttonhole, sewing di-
rection of the left and that of the right side is
different. Due to this and according to fabrics to
be sewn, it may be possible that the density of
each side looks different.