Setting The Stop Position Of Needle; Pivot Setting - JUKI DX-4000QVP Instruction Manual

4.19. Setting the stop position of needle

It is possible to set the position of the needle (upper or lower position) at the time of stopping the sewing machine.

4.20. Pivot setting

It is possible to set so that the presser foot goes up while the needle is kept at the lower position at the time of stop-
ping the sewing machine.
Select [Stop position of needle] from [Setting].
Select the "Lower stop position" or the "Upper stop posi-
tion".
When you tap the portion outside the setting screen, the
screen returns to the common setting screen.
* In the case the "upper stop position" (the sewing ma-
chine stops with its needle up) is selected, the pivot
function will be automatically turned OFF.
Select [Pivot] from [Setting].
● Setting the ON / OFF of the pivot function
: ON
: OFF
● Setting the pivot height
Set the pivot height by sliding the slide bar with your
finger to the right or left.
When you tap the portion outside the setting screen, the
screen returns to the common setting screen.
48