Lace / Feather / Overlapping And Tiling (Blackwork) Patterns - JUKI DX-4000QVP Instruction Manual

6.10. Lace / feather / overlapping and tiling (blackwork) patterns

No. Pattern
901
902
903
904
■ How to sew a combination of patterns
・ For sewing pattern
Nos. 901 and 902
in combination
① Sew the pat-
tern No. 901.
Caution: In the case of tile stitching, patterns may be slightly misaligned depending on the pat-
terns to be combined, material, thread and type of stitching to be used.
Example)
83
No. Pattern No. Pattern
904 909
906 910
907 911
908 912
A
② Select the pattern No.
902. Sew the pattern No.
902 while aligning the
inner edge of the presser
foot with the edge of the
pattern (A).
No. Pattern
Manual buttonhole presser foot (I)
913
914
Lace- / feather-like patterns can be pro-
duced by sewing patterns in parallel.
915
In addition to the above, other patterns
such as decorative patterns can be
sewn with overlapped or tiled a wider
variety of patterns.
・ For sewing pattern
Nos. 772 and 776
in combination
B
① Sew the pattern No. 772.
② Determine starting point
B of the pattern No.776
so that the pattern can
be sewn accurately
overlapped with the
already-sewn pattern
No. 772. Then, sew the
pattern No. 776 over the
already-sewn pattern No.
772.
Presser foot
Leave the machine in
Lock mode
・ For sewing pattern
Nos. 778 and 778 in
combination
C
① Sew the pattern No. 778.
② Providing a space of ap-
proximately 7 mm from the
already-sewn pattern No.
778, adjust starting position
C of the patterm No. 778 to
the position that is same in
height of the already-sewn
pattern No. 778. Then, sew
the pattern No. 778 with
horizontally inverted.