Attaching A Quilt Sleeve - JUKI DX-4000QVP Instruction Manual

6.22. Attaching a quilt sleeve

No. Pattern
044
■ How to make a quilt sleeve
❷
❸
105
Presser foot
Edge Sewing presser foot (R)
❶
❹
❺
❻
❻
❺
This stitch type is narrow blind stitch for attaching a sleeve
(material to be sewn on the back of quilted tapestry for pass-
ing a rod) to the quilt.
The narrow blind stitches are not likely to be visible from the
top surface of the quilted fabric.
1
Prepare a material for quilt sleeve.
❶ Quilting width
❷ 22cm
2
Fold both ends by 2 cm respectively.
❸
Sew the folded edges with 2-step zigzag
stitches (zigzag width 0.7 cm, stitch length
0.1 cm).
* Perform blind stitching at a slow sewing speed in
order to prevent puckering.
❸ 2cm
❹ Quilt sleeve (back)
3
Sew the quilt sleeve as illustrated in the
figure.
❺ 1cm
❻ Quilt sleeve (top)
4
Manually sew basting stitches on the loop
side of the folded edge.
❺ 1cm
❻ Quilt sleeve (top)
Leave the machine in
Lock mode