Basic Settings And Basic Operations; Connecting To The Power Supply - JUKI DX-4000QVP Instruction Manual

4. Basic settings and basic operations

4.1. Connecting to the power supply

WARNING
■ Connecting the codes
❶
21
• Disconnect the plug and turn off the power switch (turn to "O") that al-
ways sewing machine is not to use.
❸
❷
❺
❹
① Turn OFF the power switch (turn to "O")
WARNING (For U.S.A.,Canada only)
This appliance has a polarized plug (one blade wider than
the other). To reduce the risk of electric shock, this plug
is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
● Not-using foot-controller that using
start/stop-button:
② Insert cord-connector ❷ into machine-socket-inlet ❶ .
Insert plug ❸ into socket-outlet.
● Using the foot-controller:
② Insert the foot-controller-plug ❺ into the foot-control-
ler-jack ❹ .
③ Insert cord-connector into machine-socket-inlet. Insert
plug into socket-outlet.
* When the foot controller is plugged in, the start/stop button
cannot be used to start sewing.
● Start button: Can not operate to start sewing.
● Stop button: Can operate to stop sewing.