JUKI DX-4000QVP Instruction Manual page 78

■ When changing the needle entry point
1. If the stitches reach too far beyond the folded edge
2. If the stitches fail to reach the folded edge
77
Turn the zigzag width adjusting dial
clockwise (to the right).
(Turn the handwheel to check the needle entry
point. When adjusting, make sure the needle is
in the up position.)
Turn the zigzag width adjusting dial
counterclockwise (to the left).
(Turn the handwheel to check the needle entry
point. When adjusting, make sure the needle is
in the up position.)