JUKI DX-4000QVP Instruction Manual page 119

< In the case of using the wireless LAN >
● Capturing the backup data
The settings you have made are held even after updating of the software. However, if the settings are accidentally
initialized, the settings can be restored by capturing the backup data.
Refer to the next page for writing and capturing of the backup data.
Select [Wireless LAN].
The software version is checked.
Press [Download].
When you press [Start the updating] on the next screen,
updating of the software starts.
* Longer time will be required to download the soft-
ware depending on your communication environment.
Do not turn the power OFF while updat-
ing of the software is in progress.
When the software has been normally updated, the
message [Software updating is completed] is displayed.
Turn OFF the power to the sewing machine. Then, re-
turn it ON.
118