JUKI DX-4000QVP Instruction Manual page 72

* Example)
71
Press the button
After sewing the pat-
tern by one cycle
The sewing machine
performs lock stitch-
ing and stops
■ Lock stitch
Use the lock stitch button when you want to carry out
discreet back tacking (lock stitching) at the beginning and
end of sewing.
★
Sewing start
Press the lock stitch button at the position you want to car-
ry out lock stitching.
The sewing machine carries out lock stitching and stops.
Setting > Foot switch functions
Foot switch functions
It is possible to set so as to carry out lock stitching by
pressing the foot switch. (Refer to page 113)
★
Sewing end
<When start/stop button is used>
Push the lock stitch button at the end of sewing.
The sewing machine sews lock stitches and stops.
<When foot controller is used>
Press the foot switch when the end of sewing is reached.
The sewing machine sews lock stitches and stops.
* When you push the button while sewing one-point stitch-
es or letters, the sewing machine sews until one cycle of
the selected pattern is completed, sews lock stitches and
stops. The start/stop button lights up in orange during the
one cycle.
Setting > Stitch speed
Adjustable reverse stitch speed
Sewing speed of the reverse stitching and lock stitching
can be set. (Refer to page 112)
Sewing > Icons
Setting the automatic back tacking, thread
trimming and presser foot lifting
The back tacking at the beginning and end of sewing
and the back tacking and thread trimming / presser foot
lift after thread trimming at the end of sewing can be
set. (Refer to page 44)