JUKI DX-4000QVP Instruction Manual page 27

■ The type and application of the presser foot
Standard presser foot
Zipper presser foot
Overcasting presser
foot
Blind stitch presser
foot
Buttonhole presser
foot
Manual buttonhole
presser foot
Patchwork presser foot
Open toe presser foot
Quilt presser foot
(for the ruler)
Edge Sewing presser
foot
Straight presser foot
7mm guide foot or 1/4"
guide foot
Rolled hemming
presser foot
Quilt presser foot
(zigzag type)
Marking of presser foot
↓
A
This is used mainly for straight stitch and zigzag stitches.
Use this presser foot especially when sewing heavy-weight
materials.
B
This is used to attach zippers.
C
This presser foot is used exclusively for overcasting to prevent
the cut edge of fabrics from fraying.
D This presser foot is used for blind stitch on hems of trousers
and skirts, or sleeves.
E
This presser foot is used for automatic buttonholing.
I
This is used for sewing decorative stitches, letters and bartacks.
Also for manual buttonhole (pattern No.102, No.103).
P This presser foot is used for patchwork stitches. There are two
seam lines, 1/4-inch and 1/8-inch from center needle position.
O
This is used for the applique and decorative stitches.
(Front part of the presser foot is open for better visibility.)
Q
This is used for the quilt stitch.
(Machine setting: Straight Stitch and Center needle position)
The ruler can be used together with the quilt presser foot.
R This presser foot is used for patchwork, etc.
Use the guide at the center of the edge sewing foot for sewing
the center of the joining part of two pieces of materials.
S
Use this presser foot when using the throat plate for straight
stitch.
7
This guide presser foot is provided with a guide for 7-mm or
1/4-inch seam allowance for piecing.
- Fabric edge is hemmed while rolling it under.
Used for bottom of shirts, blouses, frills and the edge of hand-
kerchiefs.
-
It is used for free-motion quilting. Zigzag stitch is also possible
with this presser foot.
26