JUKI DSC-246 Instruction Manual
Hide thumbs
Also See for DSC-246:
- Instruction manual (33 pages) ,
- Handbook (272 pages) ,
- Specifications (4 pages)
Related Manuals for JUKI DSC-246
Summary of Contents for JUKI DSC-246
- Page 1 DSC-246 DSC-246-7 DSC-246V DSC-246V-7 INSTRUCTION MANUAL NOTE : Read safety instructions carefully and understand them before using. Retain this Instruction Manual for future reference. No.03 40092226...
-
Page 3: To Ensure Safe Use Of Your Sewing Machine
TO ENSURE SAFE USE OF YOUR SEWING MACHINE For the sewing machine, automatic machine and ancillary devices (hereinafter collectively referred to as "machine"), it is inevitable to conduct sewing work near moving parts of the machine. This means that there is always a possibility of unintentionally coming in contact with the moving parts. -
Page 4: Safety Precautions
SAFETY PRECAUTIONS i en nal in r r ea a age DANGER W en i i ne e n r l b n aining ele ri al ar in e re be re ening er in r er re en a i en lea ing ele ri al CAUTION... - Page 5 PRECAUTIONS TO E TA EN IN ARIOUS OPERATION STAGES Tran r a i n li an ine in a a e anner a ing n i era i n Re er e in r an al re en alling r r ing be re li ing r ine in r er again...
- Page 6 ine an le el be re re e bel er an bel in r er re en a i en e b abr ine r I a er e n i e ine i a re re n in r er re en a i en e b abr...
- Page 9 Model DSC-240 Series Description Industrial Sewing Machine Function make stitches and sew Applied harmonized standards, in particular : EN ISO12100, EN ISO10821, EN 50581 Manufacturer : JUKI CORPORATION 2-11-1, Tsurumaki, Tama-shi, Tokyo, Japan...
- Page 12 1. Mounting position of the knee lifter (Caution) The knee lifter should be mounted before the moter is installed. 2. Carry the sewing machine with two persons. (Caution) Do not hold the handwheel. 3. Do not put protruding articles such as the screwdriver and the like at the location where the sewing machine is placed.
- Page 13 DSC-246-7 DSC-246V-7 (Caution) Lubrication to section A: For the DSC-246V/-7, pull bed top face cover toward you, then lubricate section A.
- Page 14 The standard needle is GROZ-BECKERT 135 x 17 Nm130.
- Page 16 Thread the machine head in the order of through to Thread the machine head in the order of through to (Caution) For section , pass the thread on the left side of the needle.
- Page 24 B15242450A0 B163214500G...
- Page 25 21142302...
- Page 26 21142302...
- Page 28 Use the 3-phase 400 W AC clutch motor. Use an M type V belt. The following table shows the relationship among the motor pulley and the sewing speed. (Caution) The effective diameter of the motor pulley is obtained by subtracting 5 mm from the outside diameter.
- Page 29 (2,000 sti/min)
- Page 32 Please do not hesitate to contact our distributors or agents in your area for further information when neces- sary. The description covered in this instruction manual is subject to change for improvement of the Copyright 2011-2013 JUKI CORPORATION commodity without notice. • All rights reserved throughout the world. 13 · 09 Printed in Japan...
Need help?
Do you have a question about the DSC-246 and is the answer not in the manual?
Questions and answers