Manual 2-Step Buttonhole - JUKI DX-4000QVP Instruction Manual

6.15. Manual 2-step buttonhole

No. Pattern
102
103
❸
Presser foot
Manual buttonhole presser foot (I)
Leave the machine in Lock mode
* Refer to page 93 when you want to change the
1
❶
2
3
❷
4
❹ ❹
zigzag width and stitch length of a buttonhole.
Set the manual buttonhole presser foot (I).
Pass the needle thread through the hole
of the presser foot ❶ and pull it out
sideways together.
Bring down the needle on the sewing start
point ❷ and lower the presser foot.
Push start/stop button to sew.
* At this time, if the start/stop button is pushed, the
machine will stop sewing. And if the start/stop but-
ton is pushed again, then the machine will continue
to sew the left side of the buttonhole.
Push the reverse stitch button ❹ when it
reaches the necessary length ❸ of the left
side of the buttonhole.
Sew bartack and the right side of the
buttonhole, then the machine sews
bartack and right side of the buttonhole.
96