JUKI DX-4000QVP Instruction Manual page 89

■ Manual stitching
Set angles ❶ and ❷ .
Start the sewing machine to sew the pattern.
❶
The zigzag width gradually increases.
When the set zigzag width is reached, the sewing machine continues sewing keeping that zigzag
width.
Press the lock stitch button when the part you want to start ❷ is reached.
❷
The zigzag width is gradually decreased according to the set angle. Then, the sewing machine per-
forms lock stitching at the end of sewing and automatically stops.
● Storing the length of the tapering stitch pattern in memory
After you have completed sewing, the
length of seam you have just sewn can be
checked by setting [Tapering length] to ON.
If you re-start sewing from that state, you can sew ta-
pering stitches by the same seam length in repetition.
◆ ◆ History
In the state that [Tapering length] is place in ON,
the tapering length is also stored in memory to
allow the data to be called up with the history tab.
The setting that has been used for sewing the
pattern immediately before changing the pattern is
stored in memory under the history tab.
If you want to store two or more settings for one
pattern, it is necessary to store the settings one
after another by changing the pattern each time.
88