4.16. When changing the needle position
The needle position can be changed even during sewing.
0.0
45
3.5
7.0
Press
.
Change the needle position by sliding your finger on the
scale mark part.
The needle position can also be changed by turning the
adjusting dial.
The needle is
moved to the left.
White: Initial value
Blue: Changed value
When you press
, the needle is brought to the left-
most position.
When you press
, the needle is brought to the right-
most position.
The leftmost end represents "0.0" The rightmost end rep-
resents "7.0".
The needle position is represented by
Numeric values displayed on the screen: In mm
When you tap the portion above the semicircular portion
shown in the above-given figure, the setting you have done
is confirmed. Then, the screen returns to the previous
screen.
* If a new pattern is selected, the set value will be re-
turned to the initial value.
The needle is
moved to the right.
of
.