Placing And Releasing "Juki Smart Feed - JUKI DX-4000QVP Instruction Manual

4.5. Placing and releasing "JUKI Smart Feed"

"JUKI Smart Feed" is used when sewing the materials (knit, jersey, vinyl cloth, artificial leather, etc.) that are general-
ly hard to be fed, and the materials (quilt, etc.) that are likely to cause uneven material feed.
"JUKI Smart Feed" can only be used for sewing limited types of patterns.
Refer to "12. List of stitch patterns" for the patterns that can be sewn with the "JUKI Smart Feed".
❶
❶
27
● Placing "JUKI Smart Feed"
Raise the presser foot.
Fully lower "JUKI Smart Feed" ❶ while pinching it with
fingers.
When "JUKI Smart Feed" is fitted appropriately, the
relevant icon is displayed on the screen.
● Adjusting "JUKI Smart Feed"
Press .
Adjust the "JUKI Smart Feed" by sliding your finger on
the scale mark part.
The "JUKI Smart Feed" can also be adjusted by turning
the adjusting dial.
(Setting range: -5.0 - 5.0)
The top feed amount
is decreased.
White: Initial value
Blue: Changed value
When you tap the portion above the semicircular por-
tion shown in the above-given figure, the setting you
have done is confirmed. Then, the screen returns to
the previous screen.
● Releasing "JUKI Smart Feed"
Raise the presser foot.
Pinching "JUKI Smart Feed" ❶ , pull it down and push
backward until it is brought to its upper position.
The top feed amount
is increased.