JUKI DX-4000QVP Instruction Manual page 17

Presser Foot
Ⓐ
Needle Position
Ⓑ
Type of Throat Plate The type of throat plate is displayed.
Ⓒ
Sewing Condition
Ⓓ
-
Sewing-start back
❶
tacking icon
Thread tension icon Press the thread tension icon when you want to change the thread ten-
❷
Sewing-end back
❸
tacking icon
Pattern selection
❹
icon
Pattern edit icon
❺
"JUKI Smart Feed"
❻
adjustment icon
Presser foot auto lift
❼
icon
Automatic thread
❽
trimmer icon
Needle position icon Press this icon to change the needle position.
❾
USB icon

Repetition sewing

Name
Suitable presser foot for the stitch pattern is displayed.
Needle position
: Throat plate for straight stitch
Stitch Pattern which is sewn currently or to be sewn is displayed.
Automatic back tacking at the start of sewing can be set.
: OFF
sion.
The thread tension set value will be returned to the initial value by select-
ing a different pattern.
Automatic back tacking at the end of sewing can be set.
: OFF
Press this icon to select a pattern.
Pattern number of the selected pattern is displayed.
Stitch patterns can be edited.
Adjustment value of "JUKI Smart Feed" can be set.
Presser foot lifting after thread trimming can be set.
: OFF
Back tacking and thread trimming can be set.
: OFF
This icon is displayed on the pattern edit screen when a USB thumb drive
is inserted into the USB slot of the sewing machine.
Patterns can be "captured" from and "written" in the USB thumb drive by
pressing this icon.
This icon can be used to set for sewing a combination pattern in repetition
or for sewing a single pattern by one cycle.
In the case of sewing the pattern by one cycle, "1" is displayed.
Initial setting
Single pattern: Repetition
Combination pattern: 1
Function
is displayed.
: Standard throat plate
: Reverse stitch
: Reverse stitch
: ON
: ON
: Lock stitch
: Lock stitch
16