Setting - JUKI DX-4000QVP Instruction Manual

7.2. Setting

Functions (17 kinds) cab be set/changed.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
⑰
Application
Adjust the shape of stitch pattern.
It is possible to set the position of the needle (upper
or lower position) at the time of stopping the sewing
machine.
It is possible to set so that the presser foot automatically
goes up when the sewing machine stops with its needle
down.
Volume of the sound that is produced when the sewing
machine is started up or when the icon on the operation
panel is pressed can be changed.
Brightness of the operation panel or sewing area can be
adjusted.
Sewing speed at the start of sewing and reverse stitching
can be set.
The machine can be set to the presser foot lifting amount.
The sewing machine can be set to allow operation even
when the presser foot is lifted.
Function can be selected for foot switch.
The sewing machine can be set to perform twin-needle
stitching.
It is possible to connect the sewing machine to the
wireless LAN.
Sewing machine data can be initialized.
Software version can be checked.
*It is also possible to update the software.
Sewing machine log can be checked.
*Writing and capturing of the backup data can also be
carried out.
The language used for displaying messages, etc. can be
changed.
The color of the screen can be changed.
It is possible to turn the power OFF with the data
protected.
Default setting
0
Lower stop
OFF
-
-
Low speed
6mm
-
Reverse stitch
OFF
-
-
-
-
(Depending
on
destination)
OFF
-
108