Settings In The Web Visualisation - INTILION scalebloc 0.5C Operating Manual

•
If not already selected, select Disabled from the drop-down menu on the
C
OMMUNICATION
•
Enter the following settings for the IP address, the subnet mask and the gateway
(Default gateway):
IP address:
Subnet mask: 255.255.255.0
Gateway:
•
Tap on Save to save the settings.
The energy meter is now set up.
Sending a ping to the IP address of the energy meter allows you to test whether
the energy meter is reachable.
To do so, change the IP address of your computer/laptop to 192.168.55.5.
In Windows 10, press the key combination "Windows + R" to open the Run dialog
box. Enter "cmd". Start the command prompt by entering "ping 192.168.55.90"
and pressing the Enter key. If the energy meter is reachable, Windows will send
four data packages to the IP address and will receive responses.
6.3

Settings in the web visualisation

Logging in to the web visualisation
The IP address of your computer/laptop will need to be adjusted in order to access the
web visualisation. The recommended settings are shown in the illustration below:
IP address:
Subnet mask:
Standard gateway:
Preferred DNS server: 192.168.55.1
86
DHCP .
TAB
192.168.55.90
192.168.55.1
192.168.55.5
255.255.255.0
192.168.55.1
6 Commissioning
6.3 Settings in the web visualisation
INTILION GmbH