Disassembling The Panels For The Battery Management System (Bms) And The Inverter; Disassembling The Panels For The Fire-Protection Modules; Illustration 63: Disassembling The Panels For The Bms And The Inverter; Illustration 64: Disassembling The Panel For The Fire-Protection Modules - INTILION scalebloc 0.5C Operating Manual

10 Decommissioning and disassembly
10.2 Disassembly
10.2.2.4 Disassembling the panels for the battery management system (BMS)
and the inverter

Illustration 63: Disassembling the panels for the BMS and the inverter

•
Remove the four screws (1) and (2) and remove the panels for the battery
management system (BMS) and the inverter.
10.2.2.5

Disassembling the panels for the fire-protection modules

The procedure for the disassembly of a panel is described below.
Disassembly is performed in a similar way for the other panels.

Illustration 64: Disassembling the panel for the fire-protection modules

•
Remove the screws (1) and remove the panel.
•
Repeat the procedure for all panels.
INTILION scalebloc 0.5C
111