Safety And Protective Devices; Information Regarding Emergencies - INTILION scalebloc 0.5C Operating Manual

2 Safety

2.7 Safety and protective devices

2.7 Safety and protective devices
– Make sure to cordon off the working area of the battery storage system.
–
Always check that the safety and protective devices are all properly attached and fully
functioning before switching on the battery storage system.
– For the delivery of sub-components, the protective devices must be attached by the
operating company in accordance with the regulations.
– During operation, the safety and protective devices must not be bypassed, removed or
otherwise rendered inoperative.
– Protective devices may only be removed following a standstill and only after the
battery storage system has been secured against re-activation.
– Check all of the safety devices on the battery storage system for correct functioning on
a regular basis.
2.8

Information regarding emergencies

Preventative measures
– Always be prepared for accidents or fire.
– Keep first-aid equipment (first-aid kit, blankets etc.) to hand.
– Make sure that you are familiar with the accident-reporting, first-aid, fire-extinguishing
and rescue facilities.
– Keep the access routes clear for rescue vehicles and mark them accordingly if
necessary.
Measures in the event of accidents
– Rescue people from the danger zone.
– Perform resuscitation immediately if heart or breathing stops.
–
In the event of personal injury, inform the first-aid officer and an emergency doctor or
the emergency services immediately.
– Clear the access routes for rescue vehicles. If necessary, assign somebody with the
task of briefing the emergency services.
INTILION scalebloc 0.5C
27