INTILION scalebloc 0.5C Operating Manual page 28

Personal protective equipment must be provided by the operating company and must
comply with the applicable requirements.
The national regulations and specifications from the workplace risk assessment must also
be observed, along with any internal instructions from the operating company.
26
Protective gloves (1000-V protective gloves)
Wear protective gloves to protect the hands from friction, abrasions,
punctures or deep wounds, aggressive chemicals and from contact with hot
surfaces or chemical substances.
Wear isolating (1000 V) protective gloves in accordance with EN 60903 or
VDE 0682 Part 311 to protect the hands from dangerous electric shock
when touching live parts.
Safety helmet (electrician's safety helmet)
Wear a safety helmet to protect against falling or flying parts.
Wear an electrician's safety helmet marked with 1000 V to protect against
thermal impacts such as arcs and to protect against dangerous electric
shock when touching live parts in accordance with DIN EN 50365.
Face protection (electrician's face protection)
Wear face protection to protect the eyes and face.
Wear electrician's face protection suitable for working on live equipment
(WLE) to protect against potential electric arcs.
Hearing protection
Wear hearing protection to protect against hearing damage.
Fall protection
Use suitable fall protection (safety cable and harness) when working at
heights.
2.6 Personal protective equipment
INTILION GmbH
2 Safety