Windows; Driver's Power Window; Fixed Windows; Awning Windows - PREVOST H3-45 VIP Owner's Manual

Hide thumbs Also See for H3-45 VIP:
Table of Contents

Advertisement

Use the HVAC control panel to set air temperature
(refer to
"HVAC CONTROL UNIT" on page 20
Controls & Instruments chapter).
DASHBOARD AIR REGISTER

WINDOWS

The vehicle is equipped with single pane or double
pane (thermos) windows. There is either one or two
power windows and a possible combination of three
types of side windows, all of them flush-mounted to
the structure: fixed, awning and sliding windows.
Following is a description and operating instructions
for these types of windows:

DRIVER'S POWER WINDOW

The driver has a power window on the left side of the
vehicle. The windows are controlled by a rocker
switch located on the driver's control panel. Refer to
"Controls and Instruments".

FIXED WINDOWS

These windows are glued to the structure and form
an integral part of the body of the vehicle, helping
reduce vibration and noise. Fixed windows cannot be
opened.

AWNING WINDOWS

To open or close an electrically- operated awning
window, use the rocker switch button located on the
wall, next to the window. After closing the window,
maintain the rocker switch button depressed to latch
the window.
CAUTION
Avoid holding the rocker switch button depressed
after the window has reached its full opened
position or after the window has been latched.
in
Never try to open or close the awning window by
pulling or pushing directly on the window; this
could damage the opening mechanism gearbox.
A telltale light on the dashboard illuminates when an
awning window is opened. Refer to Controls and
instruments chapter for more information.
ELECTRIC AWNING WINDOW
NOTE
The awning window electrical circuit is equipped
with a thermistor protecting the components from
overheating. If the awning window is opened and
closed repeatedly, causing overheating of the com-
ponents, the thermal protection will interrupt the
operation of the window for a short while to permit
cooling down of the components. This feature also
prevents personal injuries and damages to the com-
ponents if something obstructs the window move-
ment.

SLIDING WINDOWS

To open or close an electrically- operated sliding
window, use the rocker switch button located on the
wall, next to the window.
Never try to open or close the sliding window by
pulling or pushing directly on the window; this
could damage the opening mechanism gearbox.
PA-1638 Owner's Manual X3-45 VIP
Coach interior 3-5
CAUTION
CAUTION

Advertisement

Table of Contents
loading

Table of Contents