Awning Windows; Sliding Windows - PREVOST X3-45 VIP 2017 Owner's Manual

AWNING WINDOWS

To open or close an electrically-operated awning
window, use the rocker switch button located on
the wall, next to the window. After closing the
window, maintain the rocker switch button
depressed to latch the window.
CAUTION
Avoid holding the rocker switch button
depressed after the window has reached its
full opened position or after the window has
been latched.
CAUTION
Never try to open or close the awning window
by pulling or pushing directly on the window;
this could damage the opening mechanism
gearbox.
A telltale light on the dashboard illuminates
when an awning window is opened. Refer to
Controls and instruments chapter for more
information.
Opening/closing
rocker switch button
Manual latch
release handle
ELECTRIC AWNING WINDOW
NOTE
The awning window electrical circuit is
equipped with a thermistor protecting the
components from overheating. If the awning
window is opened and closed repeatedly,
causing overheating of the components, the
thermal protection will interrupt the operation
of the window for a short while to permit
cooling down of the components. This feature
also prevents personal injuries and damages
to the components if something obstructs the
window movement.

SLIDING WINDOWS

To open or close an electrically-operated sliding
window, use the rocker switch button located on
the wall, next to the window.
Never try to open or close the sliding window
by pulling or pushing directly on the window;
this could damage the opening mechanism
gearbox.
NOTE
If the sliding window electrical circuit is
inoperative, the power sliding window can be
manually closed by removing the lateral plastic
trim located on the R. H. side of the window to
access the drive belt. Manually move the drive
belt to close the window.
SLIDING WINDOW
NOTE
T rack release
handle
The
equipped with a thermistor protecting the
components from overheating. If the sliding
18585
window is opened and closed repeatedly,
causing overheating of the components, the
thermal protection will interrupt the operation
of the window for a short while to permit
cooling down of the components. This feature
also prevents personal injuries and damages
to the components if something obstructs the
window movement.
Vehicle Interior
CAUTION
sliding window electrical
3-5
18206
circuit is