Table of Contents
Advertisement
b DME channel selection buttons
These selects the DME channel to assign to a keyer.
When the [TRANS] or [SUB TRANS] delegation button is
selected, the DME channel used by the DME wipe is
displayed. You can select the DME channel to be used
beforehand when a DME wipe is selected as the transition
type.
Note
The [DME5] to [DME8] buttons cannot be used. Reserved
for future use.
c ON AIR indicators
These indicators are lit red when the corresponding DME
channels are included in the final program output.
d Setting buttons
These buttons are used to adjust keys.
The settings button assignments for different functions are
spread over three pages (1/3, 2/3, 3/3), and you can switch
between them using the [PAGE] button.
The functions set in each button can be viewed in the
setting buttons display section.
Setting buttons display section: PAGE 1/3
Setting buttons display section: PAGE 2/3
Setting buttons display section: PAGE 3/3
Key type selection buttons
These buttons select the key type.
Press a button to view the parameters on the display, and
use the adjustment knobs to change settings.
• LUM (luminance key)
• LIN (linear key)
• CRK (chroma key)
• PTN (key wipe pattern key)
For details, see "Key Operations (Key Control Block)"
(page 116).
Key fill/key source selection buttons
These buttons select the key fill and key source.
• AUTO SEL (auto select)
• SPLT (split)
• MAT FILL (matte fill)
For details, see "Key Operations (Key Control Block)"
(page 116).
Key modifier buttons
These buttons modify the edges of keys.
Press a button to view the parameters on the display, and
use the adjustment knobs to change settings.
• BDR (border)
• DROP BDR (drop border)
• SHDW (shadow)
• SOFT EDGE
For details, see "Key Adjustments (Key Control Block)"
(page 118).
Resizer operation buttons
These buttons zoom, move, and rotate keys using a resizer.
Press a button to view the parameters on the display, and
use the adjustment knobs to change settings.
• RSZR (resizer)
• ROT X (rotation X)
• ROT Y (rotation Y)
For details, see "Two-Dimensional Transforms and
Rotation of Keys" (page 121).
Chroma key setting buttons
These buttons are used to adjust chroma keys.
• SMPL MARK (sample mark)
• AUTO STRT (auto start)
• KEY ACTV (key active)
• COL CAN (color cancel)
For details, see "Key Adjustments (Key Control Block)"
(page 118).
PAGE button
This button switches the settings button page.
PAGE button
The page switches in the order 1/3 t 2/3 t 3/3 each time
the button is pressed. The currently selected page number
is displayed in the setting buttons display section.
e Function buttons
These buttons select the functions used for key operations.
Button name
OVERRIDE
34
Description
Selects a DME channel assigned to
another keyer from the currently
selected keyer (override function).
Press and hold the [OVERRIDE]
button and press the target DME
channel button to select it.
Advertisement
Table of Contents
