Table of Contents
Advertisement
Note
If the selected register is locked, [Off Line Edit] is disabled
and it is not possible to display the Off Line Edit menu.
Off Line Edit menu
d Editing button group
a Register or file number
b Register or file name
c Macro creation list
h Delete button
g Append button
f Insert Before button
e Macro editing candidate list
a Register or file number
Shows the number of the register or file being edited.
b Register or file name
Shows the name of the register or file being edited.
c Macro creation list
Lists the macro events that are saved in the register or file.
The cursor moves to the selected event. Each macro event
consists of the following components, which you can
check in the list.
• Contents: Event statement, Continue statement,
comment (#), or event number selected using [Contents]
in the editing button group.
• Symbol: Event type (ASCII character string) selected
using [Event] in the editing button group.
• Data: Parameters and data set in the editing button
group.
k Exit button
j Store button
i Set button
For details about event components, see "Macro File
Editing Rules" (page 463).
d Editing button group
This row of buttons shows the components of an event. To
carry out event editing: (1) press an editing button, then (2)
select an item from the list of macro editing candidates,
and repeat this process as required.
e Macro editing candidate list
Shows the list of editing candidates for the selection from
the editing button group.
f Insert Before button
Inserts immediately before the event selected in the macro
creation list.
g Append button
Adds an empty row at the end of the macro creation list.
h Delete button
Deletes the event selected in the macro creation list.
i Set button
Reflects the item selected in the macro editing candidate
list, in the macro creation list and editing buttons.
j Store button
Saves the editing results of the macro register or macro
file.
k Exit button
Closes the Off Line Edit menu without saving the editing
results of the macro register or macro file, and returns to
the previously displayed menu.
Offline editing of macro events
To insert an event
1
In the macro creation list, select the event at the
position where you want to insert, and select one of the
following.
To insert before the event selected in the list: Press
[Insert Before].
To insert at the end of the list: Press [Append].
A blank row is added at the end of the macro creation
list.
2
Press [Contents] in the editing button group.
The following items relating to event types appear in
the macro editing candidate list.
• Event: Event
• Continue: Event continuation
• #: Comment
341
Advertisement
Table of Contents
