Retract The Mast With Crank Handle Assembly - Will Burt Stiletto AL 4-Meter Operating Instructions Manual

S AL O
TILETTO PERATING

Retract the Mast with Crank Handle Assembly

When power is removed from the Mast System, the brake is applied to the Motor. This prevents
the mast from back driving. When manually operating the Mast System, the operator should
expect resistance by the brake.
To retract the mast manually:
1. Ensure the mast is not powered. Do not access the Manual Override until power has
been removed from the Mast System.
2. Locate the Manual Override on top of the Motor (Figure 3-5).
3. Remove the dust cap protecting the Manual Override.
4. Insert the Crank Handle Assembly.
5. Use the Crank Handle Assembly to retract the mast by turning the Crank Handle
Assembly counterclockwise. Be sure to stay clear of the collar during operation as they
create a pinch point hazard.
6. When the mast has reached the desired height, remove the Crank Handle Assembly and
secure the dust cap in place to protect the Manual Override from dust, sand, and
moisture intrusion.
Note: The mast will hit a hard stop when completely nested.
7. Store the Crank Handle Assembly in an accessible area in close proximity to the mast.
3-14
I
NSTRUCTIONS
Original Instructions TP-5418901-F
August 2020