S
AL O
TILETTO
PERATING
2.3 Installation Hardware
Table 2-2 describes hardware that may be used during installation. Depending on the specific
installation application, all hardware may not be used.
Hardware*
Support Bracket Assembly (Together)
(6) 10.5x20.0x2.2 18-8
SSTL Flat Washer
(P/N: 4093)
M10-1.5x30.0 SSTL
Bolts (P/N: 6082)
M10x18.10x2.05 18-8
SSTL Lock Washers
(P/N: 4351)
M10-1.50 18-8 SSTL
Nuts (P/N: 5907)
Support Bracket Assembly (To the Support Structure)
(6) M10 (⅜ Inch) Sets
of Stainless Steel
Hardware
Base of Mast System (To the Mounting Surface)
(4) M12 (½ Inch)
(Minimum) Sets of
Stainless Steel
Hardware
Universal Control Box (To the Support Structure)
(6) M6 (¼ Inch) Sets
of Stainless Steel
Hardware
Optional EMI Filter (To the Support Structure)
(4) M4 (#8) Sets of
Stainless Steel
Hardware
Ground Straps
10-32 UNF-2B
Hardware
2-4
I
NSTRUCTIONS
Table 2-2 Installation Hardware
Supplied By
Notes
Will-Burt
Ships with Mast System
Will-Burt
Ships with Mast System
Will-Burt
Ships with Mast System
Will-Burt
Ships with Mast System
Customer
The bolts should be sized to length to allow for the
thickness of the Support Bracket Assembly, support
structure, any shims, and all mounting hardware (e.g. flat
washers, lock washers, and nuts).
Customer
The bolts should be sized to length to allow for the
thickness of the base of the mast, mounting surface, any
shims, and all mounting hardware (e.g. flat washers, lock
washers, and nuts). Use heavy-duty, extra-thick (MS
15795-819) stainless steel flat washers.
Customer
The bolts should be sized to length to allow for the
thickness of the Universal Control Box, mounting surface,
any shims, and all mounting hardware (e.g. flat washers,
lock washers, and nuts).
Customer
Will-Burt
Ships with Mast System
Original Instructions
Continued
TP-5418901-F
August 2020