Additional Accessory Options; Table 1-4 Additional Accessory Options - Will Burt Stiletto AL 4-Meter Operating Instructions Manual

S AL O
TILETTO PERATING

Additional Accessory Options

Table 1-4 describes a number of additional accessory options available for the Mast System.
Accessory
Lift Brackets (P/N: 4674902)
Input Power Cable Pigtails
P/N: 4674701
P/N: 4674702
P/N: 4784001
PositionIt™
P/N: 5061001
P/N: 5191201
P/N: 5467801
Roof Seal Kit (P/N: 4794602)
®
Nycoil Cable Conduit
1-30
I
NSTRUCTIONS

Table 1-4 Additional Accessory Options

Description
Used to aid in lifting and transporting the mast vertically
during installation. Includes (4) SCR CAP M8-
1.25x16.0 SC HD SSTL.
Connects customer power to the Mast System.
Mast Systems ship standard with a Power Cable
Connector that the customer wires according to the
specific mounting application needs and then attaches
to J1 on the Universal Control Box or the EMI filter
input.
The optional Input Power Cable Pigtails have a Power
Cable Connector with pre-wired flying leads of
predetermined lengths to simplify the process.
Unshielded 5 Meter
Unshielded 8 Meter
Shielded 5 Meter
Remotely pans and tilts a payload.
PI-150 with a payload capacity of 150 lb.-ft. (202 N-m).
PI-75 with a payload capacity of 75 lb.-ft. (101 N-m).
PI-35 with a payload capacity of 35 lb.-ft. (47.4 N-m).
Used with internal mounting applications (i.e. mounting
inside an enclosure of vehicle.
Manages payload cables. The Nycoil Cable Conduit
length should be two times the difference between the
mast extended and nested heights. To go around the
mast, a minimum of 1 ¼ inch (31.8 mm) cable ID with a
21.5 inch (546 mm) coil OD is required. Smaller sizes
are available if the Nycoil Cable Conduit is offset.
Original Instructions
Continued
TP-5418901-F
August 2020