S
AL O
TILETTO
PERATING
Extend the Mast with UP/DOWN Switch
To extend the mast with the UP/DOWN Switch:
1. Push back the switch guard covering the UP/DOWN Switch.
2. Hold the UP/DOWN Switch in the up position (Figure 3-1). As long as the UP/DOWN
Switch is held in the up position, the mast will extend and the Display will show the
appropriate intermediate extension height. Be sure to stay clear of the collars during
operation as they create a pinch point hazard.
3. Release the UP/DOWN Switch when the desired height is reached.
If the UP/DOWN Switch is released before the maximum extension is reached, the mast
will quickly stop and the display will show the current extension.
If the UP/DOWN Switch is held long enough, the mast will automatically stop when the
Full Extension Limit Switch is reached and the display will show "DEPLOYED".
4. Push the switch guard back into position to protect the UP/DOWN Switch.
3-6
I
NSTRUCTIONS
Figure 3-1 UP/DOWN Switch Up Position
Original Instructions
UP/DOWN
Switch
Up Position
TP-5418901-F
August 2020