Drive Assembly
The Drive Assembly (Figure 1-5) extends and retracts the mast tubes.
600 Watt
28 VDC Motor
Drive Assembly Location
The Drive Assembly includes:
•
Drive Screw
•
Motor
•
Mast Drive Housing
Drive Screw
The mast is driven by a stainless steel, electro-mechanical Drive Screw. Each moving tube (all
except the Base Tube) has an Extension Nut attached to its bottom which rotates on the Drive
Screw.
The Drive Screw:
•
Is located in the center of the mast
•
Extends and retracts the tubes sequentially as it rotates
•
Responds to either input from the Universal Control Box or by manually cranking the
motor (with all power disconnected)
TP-5418901-F
August 2020
Mast Drive Housing
Figure 1-5 Drive Assembly (Not to Scale)
Original Instructions
S
AL O
TILETTO
PERATING
Drive Screw
600 Watt
28 VDC Motor
Drive Assembly (Mast Tubes Removed)
I
NSTRUCTIONS
1-13