Collars; Top Tube Ring; Figure 1-3 Collars (Collars From The 6-Meter Stiletto Al P/N: 711990692 Shown) - Will Burt Stiletto AL 4-Meter Operating Instructions Manual

Collars

Collars are fitted to the top end of each tube except the Top Tube which has a Top Tube Ring
(Section 1.7.1.2). The collars have:
•
Automatic locks
•
Integrated dirt/dust wipers and icebreakers. The taper on the collars also reduces the
pinch points.
•
Four Accessory Contact Points on each collar for the mounting of accessories. The
Accessory Contact Points each have two M6x1 threaded holes 10 mm deep. These
holes are 15 mm center-to-center apart.

Figure 1-3 Collars (Collars from the 6-Meter Stiletto AL P/N: 711990692 Shown)

Top Tube Ring

•
Is attached to the Top Tube
•
Contains an Air Filter (P/N: 5417801) used to prevent dirt from entering the mast
•
Has a Payload Interface to attach the customer payload or payload adapter. The
standard Payload Interface is shown in Figure 1-4. Contact The Will-Burt Company for
alternative options.
TP-5418901-F
August 2020
Accessory
Contact Point
Original Instructions
S AL O
TILETTO PERATING
I
NSTRUCTIONS
1-11