Display; Figure 1-17 Universal Control Box Components - Will Burt Stiletto AL 4-Meter Operating Instructions Manual

S AL O
TILETTO PERATING
The Universal Control Box works with input from the:
•
"Nested Limit Switch" which:
o Prevents the mast from being over-nested
o Installed in the mast
o An electronic switch triggered by a probe attached to the bottom of the center
tube
•
"Fully Extended Limit Switch" which:
o Prevents the mast from being overextended
o Is integrated in the mast
o Is a Reed switch mounted outside the base tube that detects a permanent
magnet attached to the bottom of the largest moving tube
•
"Proximity Sensor":
o Counts the teeth on a sprocket attached to the Drive Screw
o Interprets this data as an extension distance to generate the intermediate
extension height
Components of the Universal Control Box (Figure 1-16) include:
•

Display

•
UP/DOWN Switch with Waterproof Boot
•
OVERRIDE Switch with Waterproof Boot
•
Bulkhead Connectors (J1, J2, J3, and J4)
•
Printed Circuit Board (Not shown)
Display
1-22
I
NSTRUCTIONS
J1
J2

Figure 1-17 Universal Control Box Components

Original Instructions
J3
J4
OVERRIDE
Switch with
Waterproof Boot
UP/DOWN
Switch with
Waterproof
Boot
TP-5418901-F
August 2020