Universal Control Box Operation; Detailed Instructions; Prepare The System For Powered Operation - Will Burt Stiletto AL 4-Meter Operating Instructions Manual

3.4 Universal Control Box Operation

This section describes operation of the Mast System using the Universal Control Box.
If an emergency stop is required at any time, release the UP/DOWN Switch or press the
emergency stop button. This will cause the mast to stop extending or retracting.
Quick Reference
The following is a quick summary of operation of the Mast System using the Universal Control
Box. Detailed instructions (Section 3.4.1) follow the quick summary.
In general, operate as follows:
1. Prepare the System for Powered Operation (Section 3.4.1.1)
2. Extend the Mast with UP/DOWN Switch (Section 3.4.1.2)
3. Extend the Mast with OVERRIDE Switch (Emergency Operation) (Section 3.4.1.3)
4. Retract the Mast with UP/DOWN Switch (Section 3.4.1.4)
5. Retract the Mast with OVERRIDE Switch (Emergency Operation) (Section 3.4.1.5)
6. Access the Cycle Count and Temperature with UP/DOWN Switch (Section 3.4.1.6)

3.4.1 Detailed Instructions

The following are detailed instructions describing the operation of the Mast System using the
Universal Control Box.

Prepare the System for Powered Operation

To prepare the Mast System for powered operation:
•
Ensure the Mast System is stationary on level, stable ground
•
Perform the Pre-Operation Check (Section 3.1)
•
If necessary, remove any transit tie-downs
•
If necessary, secure any cables to the mast
•
If necessary, secure the payload to the mast (Section 2.9)
•
If necessary, reset the emergency stop
•
If necessary, turn on the optional (customer supplied) master power switch to supply
power to the Mast System. The Universal Control Box will scroll the "STILETTO
UNIVERSAL ..." message and then display, NESTED, DEPLOYED, an intermediate
height, or an error code as appropriate.
The Mast System is now operational.
TP-5418901-F
August 2020
S
TILETTO
Original Instructions
AL O I
PERATING NSTRUCTIONS
3-5