2.2 Installation Equipment
Table 2-1 lists equipment recommended for installation.
Personal Protective
Safety Glasses
Hearing Protection
Hand Tools
Appropriate Hardware
(Section 2.3)
Measuring Tape
Wrenches
Equipment
Hoist
Expendables
Anti-Seize
Rags (Clean and Dry)
* Note:
•
Depending on the local, regional, and national standards and codes of practice, and the environment,
additional personal protective equipment may be necessary.
•
Depending on the Mast System configuration, additional equipment, including but not limited to electrical
components (e.g. wire, switches, fuses, circuit breakers, etc.), may be required.
•
When disposing of any disposables or components, do so according to any applicable local, regional, and
national standards and codes of practice.
TP-5418901-F
August 2020
Table 2-1 Equipment Recommended for Installation
Recommended Equipment*
Work Gloves
Hard Hat or Helmet
Drill
Rubber Mallet
Washers or Spacers (For Shimming)
Sling
®
Loctite
Blue 242/243 or Equivalent
Original Instructions
S
AL O
TILETTO
PERATING
Nitrile or Vinyl Gloves
Safety Shoes
Level
Torque Wrench
I
NSTRUCTIONS
2-3