Table of Contents
Advertisement
Hardware*
Payload (To the Mast System)
(6) M8 Sets of
Hardware
* Unless otherwise indicated, the mounting hardware must include proper means to resist vibration loosening such
as thread-locking compound and locking hardware. Torque all hardware as appropriate for its size and grade.
Torque values in these instructions assume the use of Will-Burt provided hardware. Depending on the specific
installation application, all hardware may not be used. Additional hardware may be required for additional
accessories, or customer-specific applications.
2.4 Installation Dimensions
This section describes installation dimensions as follows:
•
Mast Installation Dimensions (Section 2.4.1)
•
Support Bracket Assembly Dimensions (Section 2.4.2)
•
Universal Control Box Dimensions (Section 2.4.3)
•
EMI Filter Dimensions (Section 2.4.4)
Dimensions provided are for reference only and are not intended for vehicle design purposes.
Depending on the Mast System and components being used, the exact design of components
may vary. Masts with other heights, capacities, and finishes are available. For more information
on additional mast sizes, capabilities, and finishes, see www.willburt.com.
TP-5418901-F
August 2020
Table 2-2 Installation Hardware Continued
Supplied By
Notes
Customer
The standard Payload Attachment Interface comes with
(6) M8x1.25 – 6H ↧12 mm holes. When using stainless
steel hardware, use an anti-seize to prevent galling.
Original Instructions
S
AL O
TILETTO
PERATING
I
NSTRUCTIONS
2-5
Advertisement
Table of Contents
