S
AL O
TILETTO
PERATING
3. Release the UP/DOWN Switch and OVERRIDE Switch when the desired height is
reached.
4. Push both switch guards back into position to protect the UP/DOWN and OVERRIDE
Switches.
Retract the Mast with UP/DOWN Switch
To retract the mast with the UP/DOWN Switch:
1. Push back the switch guard covering the UP/DOWN Switch.
2. Hold the UP/DOWN Switch in the down position (Figure 3-3). As long as the UP/DOWN
Switch is held in the down position, the mast will retract and the display will show the
appropriate intermediate extension height. Be sure to stay clear of the collars during
operation as they create a pinch point hazard.
3. Release the UP/DOWN Switch when the desired height is reached.
If the UP/DOWN Switch is released before the Nested position is reached, the mast will
quickly stop and the display will show the current extension.
If the UP/DOWN Switch is held long enough, the mast will automatically stop when the
Full Nested Limit Switch is reached and the display will show "NESTED".
3-8
I
NSTRUCTIONS
Figure 3-3 UP/DOWN Switch Down Position
Original Instructions
Down Position
UP/DOWN
Switch
TP-5418901-F
August 2020